TPU hot melt adhesive film and hot melt adhesive stick film for garment leather

Physical Property & Application Hot melt adhesive film was widely used in emblem,patches,textile,garments and electron field.As the hot melt adhesive film has strong stickability,we always used it as underlayer and interlayer.It will make the finished goods more flattened,beautiful.So it is a very goods choice to use th

Featured Products

Physical Property & Application
 

Hot melt adhesive film was widely used in emblem,patches,textile,garments and electron field.As the hot melt adhesive film has strong stickability,we always used it as underlayer and interlayer.It will make the finished goods more flattened,beautiful.So it is a very goods choice to use this film for your production.

BrandZYH
ModelT04-18
Thickness0.015-0.25mm
Width10-150cm
length200y/roll or customized
ColorTransparent/ivory
Melting point80-130°C
Adhering temperature(°C)110-190°C
Adhering pressure(bar)2.0
Fusing time10-15s
WashableYes
Adhesive objectmercery/ cellulose/cotton/wool/dacron/Embroidery 
trademark/Elastic fabrics composite/ pu/ leather/paper/silicon
Raw materialTPU
Can be customYes

TPU Hot Melt Adhesive Membrane & Hotmelt Glue Stick Film for Garment and Leather
TPU Hot Melt Adhesive Membrane & Hotmelt Glue Stick Film for Garment and Leather
TPU Hot Melt Adhesive Membrane & Hotmelt Glue Stick Film for Garment and Leather
TPU Hot Melt Adhesive Membrane & Hotmelt Glue Stick Film for Garment and Leather
 
Why choose us
TPU Hot Melt Adhesive Membrane & Hotmelt Glue Stick Film for Garment and Leather
TPU Hot Melt Adhesive Membrane & Hotmelt Glue Stick Film for Garment and Leather
 
TPU Hot Melt Adhesive Membrane & Hotmelt Glue Stick Film for Garment and Leather

TPU Hot Melt Adhesive Membrane & Hotmelt Glue Stick Film for Garment and Leather

TPU Hot Melt Adhesive Membrane & Hotmelt Glue Stick Film for Garment and Leather
 
Delivery
 
20 feet container loading
We will track the order according to the customer's requirements and inspect the product online. At the end, there is a special person to supervise the loading. If necessary, we can send the loading picture to the customer.
TPU Hot Melt Adhesive Membrane & Hotmelt Glue Stick Film for Garment and Leather
 
FAQ
1.What are the steps to place an order with us?
1) Sample approval.
2) Client make 30% deposit or L/C at sight normally after receiving our PI. 3) Client approve our Pre-production sample, and get the testing report if any necessary
4) Client approve our shipping sample.
5) Arrange shipment.
6) Supplier arrange necessary documents and send copy of these documents to you.
7) Client finish the balance payments.
8) Supplier send original documents or telex release the goods.
2.Can you send samples for reference?
We are happy to send you samples for inspection. Samples are free, but you may need to pay the courier fee.
3. How to confirm the quality with us before start to produce?
1) You can get a free sample and choose from it, and then we make the quality according to that.
2) Send us your samples, and we make the product according to your quality.
4. How to solve the quality problems after sales?
1) Take photos of the problems and send to us.
2) Take videos of the problems and send to us.
3) Send back the physical problem products by express to us.
4) After we comfirmed the problems, we will draw up the satisfied proposal for you within three days.
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours