Made in China epoxy/polyester powder coating for indoor fitness equipment

Product DescriptionEpoxy/Polyester Powder CoatingsThe epoxy resin and polyester resin are used as the main raw materials to prepare the film, and they have their own unique properties, which makes the produced film have excellent leveling, decorative, mechanical properties and strong corrosion resistance. It is mainly used for s

Featured Products


Product Description

Epoxy/Polyester Powder Coating for Indoor Fitness Equipment Made in China

Epoxy/Polyester Powder Coatings
The epoxy resin and polyester resin are used as the main raw materials to prepare the film, and they have their own unique properties, which makes the produced film have excellent leveling, decorative, mechanical properties and strong corrosion resistance. It is mainly used for surface painting of automobile, household appliances, metal furniture, instruments, indoor fitness equipment, radiator and other industries.
physical propertyproportion1.4~1.8g/cm3,It varies in color and luster.
granularityThe standard size is 35-40 micron, less than 10 micron powder < 10%, more than 90 micron powder < 0.5%.
Mobility24-27mm 
 
Performance Index of Coating Filmperformance    Testing standarddetection result
Gloss 60 degrees GB/T9754-881° to 95°+
impact testISO6272GB/T1723-19931250px/kg
Cupping testISO1520GB/T9753-1988≥8mm  
adhesionISO2409GB/T9286-1998Level 0
Bending testISO1519GB/T6742-19862mm
Pencil hardnessASTMD3363GB/T6739-19961H-2H
Salt spray testISO7253GB/T1771-1991≥500h
Moisture resistanceISO6270GB/T1740-1979≥1000h
Photoaging propertyPoor light resistance, not recommended for outdoor use
Note: 1. The above tests were carried out with 0.8mm rust and oil removal cold-rolled steel plate under experimental conditions. The coating thickness is about 70um.
      2. The performance index of the above coatings may decrease slightly with the decrease of gloss.
 
Construction conditionCuring conditionsIt is suggested that 200 C/10 minutes or 140 C/30 minutes, 160 C/20 minutes, 180 C/10 minutes can also be designed according to user's needs
Pre-processingDifferent substrates are treated with different pretreatments (phosphating, sandblasting, shot peening)
SprayCorona electrostatic spraying; friction electrostatic spraying; electrostatic fluidized spraying (required first); fluidized bed hot dipping (required first); other spraying methods (required first)
Theoretical coverageCoating thickness: between 40 and 150 microns. It is recommended that the film thickness be 50 to 80 microns. Average coverage: 10-12 m2/kg, film thickness 60 microns (calculated by 100% utilization)
Scope of applicationindoor
 
Other mattersPackaging and transportation25kg/box, lined with polyethylene plastic bags, non-hazardous goods, can be transported in various ways, but should avoid direct sunlight, damp and heat, avoid contact with chemical substances.
Storage requirementsStore in a ventilated, dry and clean room at 30 C. Keep away from fire sources, heating, direct sunlight, and stack in the open air is strictly prohibited. Under these conditions, the powder can be stored stably for 6 months. Over the storage period, it can be re-examined, and if the results meet the requirements, it can still be used. All containers must be re-packaged and returned to the original packaging after use.
Health safetyContainers should be kept sealed and not close to fire or heating. Avoid inhaling powder. Food and smoking are prohibited in storage areas. The builder should wear anti-static shoes and keep grounding. Coatings attached to the skin can be washed with soap.


Application scope

Epoxy/Polyester Powder Coating for Indoor Fitness Equipment Made in ChinaEpoxy/Polyester Powder Coating for Indoor Fitness Equipment Made in China



Product process pictures

Epoxy/Polyester Powder Coating for Indoor Fitness Equipment Made in China


Epoxy/Polyester Powder Coating for Indoor Fitness Equipment Made in China

Epoxy/Polyester Powder Coating for Indoor Fitness Equipment Made in China
Epoxy/Polyester Powder Coating for Indoor Fitness Equipment Made in China



Company information
Jiangsu Changsong Technology Development CO., Ltd
Business Type:Manufacturer/Factory
Year established:1991
Main Markets: Asia Pacific, Middle East, Europe, south & north America     
Advantage:our factory is close to Shanghai port,convenient transportation;trade assurance supplier;
excellent research and development group;professional testing facilities; reliable quality and good service and reasonable price


Purchase Note:
1.M.O.Q :
The minimum order is2000kg ,each color ≥ 100kg
2.Colors:
RAL color :we usually use RAL colors that is widely used in paint industry and easily find in market
Custom color : Color matching is available , if you have colors model ,please send to us for matching .
3.Prices:
Prices depend on the colors and using environment ,for prices please tell us the colors 
and using environment (indoor use or outdoor use).
4.Time of delivery :
Production will take about 5-8 days after receipt of prepayment,this is subject to the quantity . 
5.Payment :
Prefer T/T IN ADVANCE PAYMENT; 
30% T/T prepayment , 70% T/T before shipment (or against BL copy)  or LC at sight .
6.Samples:
1kg powder sample is available for each color for your testing.
Sample is free of cost,but  if you pay for the air freight we will highly appreciate.

Contact us:Eva zhang
Jiangsu Changsong Technology Development Co., Ltd
Mb :+86 18662361801
Website:changsongcoating.en.made-in-china.com

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours