Solar Machine Solar Panel Laminator Solar Cell Laminating Machine
Equipment Performance
The entire stainless steel chamber avoids welding deformation of the stainless steel and the general steel. High quality welding of argon reduces vacuum system leaking rate. The use of calibration thermo-couple gauge made no false vacuum reading. Strengthened design and the high smoothness avoid the laminated fragment and shift.
Hot working design of the computer auxiliary reduces the temperature unevenness on controlling of the false muti-spots. The close heat conduction coupling avoids temperature fluctuation on the laminated process. Optimized PID control improves the accuracy of temperature control. The fabric strengthened offset plate extends the using time and reduces the working costs. The program-controlled design levels up the flexibility.
Applicable Field
Laminating of monocrystalline silicone, poly-silicone and amorphous silicone solar modules.
Technical features
1, Oil Heating;
2, PDI artificial temperature control and multi-point;
3, Temperature monitoring;
4, Siemens PLC programmable controller, Power trip, light grating protection, cover self-locking, operation monitoring, automatic alarm device;
5, Laminate as sections and different speed, adjust pressure as sections;
6, Flat worktable, more convenient for the module in and out;
7, Heating plate has good thermal conductivity and higher thermal efficiency;
8, Prevent-rubber-folded design can extend the service life, improve the flatness of pressure;
9, Flange structure, more convenient for changing the rubber.
Technical parameters
Model | SLT-2236 |
Laminate Length * Width | 2200mm x 3600mm |
Pumping speed | 70L/S |
Unevenness of the worktable | Unevenness≤200μm/m² |
Pumping time | 5~7min |
Laminate time | about 17~20min. |
Max. Laminate Thickness | 28mm |
Press of compressed air | 0.5~0.8MPa |
Work vacuum degree | 80~20Pa |
Ultimate vacuum | 20 Pa |
Controllable temperature precise | ≤±0.8ºC |
Temperature control mode | PID Control |
Heating mode | SD320 Heat by oil |
Power supply | 380V 3 phase / 5wire |
Peak power | 75 Kw |
Work power | 35 Kw |
Control mode | Automatic/ Manual |
Air discharge speed | Can adjust continuously within 0~50L/S |
Maximum temperature | 180ºC |
Work temperature | 100ºC~160ºC |
Ambient temperature | 0~50ºC |
Temperature uniformity | ±1.5ºC Multi-point temperature control |
Weight | 18T |
Dimension | 12000mm ×3240mm ×1580mm |
ARGUS Turnkey Solution for Automatic Solar Panel Production Line
ARGUS Automatic Solar Cell Tabber Stringer Soldering Machine
ARGUS Automatic Solar Strings Layup Machine
WE DO SOLAR PANEL PROJECTS AS MANUFACTURER!
Exhibition
Contact Information
Wuhan Sunic Photoelectricity Equipment Manufacture Co., Ltd.
Web: http://whsunic.en.made-in-china.com
Add: 4#, Huanglong Shan North Road, East Lake High-Tech District,
Wuhan, P.R. China. P.C.430070